Overwatered Flaming sword Too much water for too long can cause your Flaming sword to rot. Root rot can occur if you keep the potting mix too moist, which creates a hospitable environment for bacteria and fungus. Once present, they cause the roots to soften and decay. Too much water in the soil also suffocates the roots, making them unable to absorb nutrients or moisture to be used by the plant. This type of bromeliad could also rot from the stem if the rosette is kept too full. It’s a delicate balance and you may need to add water to the rosette fairly often, so this might not be the best plant for you if you tend to forget about your plants for long periods of time. Symptoms of rot include softening leaves that turn yellow or brown before eventually falling off. The plant may also look generally unwell and wilted. If you have overwatered this plant, it may not be possible to save it, so always try to stay on the side of too little water over too much if there’s any doubt. At the first sign of overwatering, it is important to take quick action if you want to try to save your Flaming sword. If the problem is too much water in the potting soil, the remedy is to remove the plant from its pot and replace the wet soil. Any roots that have been affected by rot (they’ll appear dark brown or black and soft) should be pruned off with a sterilized knife or garden shears. If you have added too much water to the rosette and the stem is rotting, the process is different. Use your sterilized garden knife to cut off any part of the stem that shows signs of rot, and flush out the rosette cavity thoroughly to get rid of any bacteria that may be lingering. The plant may not be able to recover after this, but this method may allow you to save your Flaming sword from dying. Underwatered Flaming sword Flaming sword can tolerate fairly dry potting mix, but if the rosette stays dry for more than a couple of days, you may run into problems. The symptoms of underwatering include dried out leaves, especially the leaf tips. Usually the top parts of the plant will be affected first, since those areas are farthest from the water source. In severe cases, their leaves may even appear curled, but this could also be because of low humidity. Be sure to check your soil before watering again. If you forget about watering your Flaming sword, don’t panic. Unless you’ve allowed the plant to get totally dehydrated, it will probably be able to recover. Simply give the plant a thorough drink of water both in the reservoir and the soil. You can also add humidity around your plant to revive it more quickly by misting the leaves with water. Remove any leaves that have dried out, and then just resume your usual watering schedule. The plant should recover shortly once it has the water it needs.

During spring, while the Flaming sword is actively growing, water about once a week. Be aware that the frequency will change depending on the temperature, humidity, and other conditions in your home.You may need to water more frequently in the summer. Decrease watering as the temperatures cool down in autumn. It will need the least amount of water in the winter when it experiences the least growth. Check the soil with your finger or a moisture meter to be sure it is dry before you water again. In winter, most people will choose to water only once every 2 weeks or even longer. Many gardeners will neglect to water in the soil, thinking that water in the center of the rosette is all the Flaming sword needed. However, Flaming sword still needs the root to absorb most of the water, so make sure the soil is slightly moist but not soggy, and water after checking that the soil is dry to the surface 2-3 inches to ensure proper plant growth. This is the key judgment in deciding how much watering you should do.

There are two different but important sources of water for Flaming sword: the water in its rosette and the water absorbed by the roots through the potting soil. This makes it different from the majority of houseplants, and adds an extra step to your care routine. First, the rosette should contain water and not be allowed to dry out for long periods of time (a day or two will probably be fine). It should be kept about ¼ of the way full, since filling the cavity too full could lead to the stem rotting. You may need to top up the water often during the growing season, up to several times per week, but it should be less frequent in the winter months. Using rainwater or distilled water helps avoid salt and mineral buildup in the cavity. You should always use room temperature water with your Flaming sword as this plant is used to a temperate environment and hot or cold water could shock it. Every 1 to 2 weeks, change out the water in the center of the plant and flush out the cavity with clean water to prevent bacteria from estalishing itself. Try to avoid splashing water on the flower of your Flaming sword when you are watering or filling the reservoir. Secondly, you should occasionally water the growing medium. It is better to provide too little water to the root system over too much, since it is easy to overwater this plant if you keep the soil too wet. In order to allow plenty of air circulation around the roots, choose a potting mix that is made to drain well, such as a cactus and succulent mix or potting mix soil. The soil should dry out opportunely before you water this plant again. During spring and autumn while the Flaming sword is actively growing, water about once a week. But the frequency will change depending on the temperature, humidity, and other conditions in your home. Checking the soil is a much better way to gauge when to water again.

The usual goal for the Flaming sword is to have it grow as big and full as possible. While the plant doesn’t require consistent trimming, it can benefit by removing old flowers and any damaged, dead, or diseased leaves. You can also trim back the leaves if it is starting to get too big for the pot and space you are keeping it.

Flaming sword don’t have a winter dormancy cycle at the suitable temperature. With that said, their growth does slow down as the days get shorter, however the leaves don’t die. What does that mean for pruning? It means there’s no specific season where it’s better to prune. Ideally, you will want to wait until the flower blooms before pruning it, which can take about a month after the appearance of the blossom. With deadheading, you’ll want to do this around late spring or when only a few of the blossoms have faded. You should always prune brown or yellow leaves when you notice them. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

Once you’ve pruned your plant, you should dispose of the stems and leaves either by composting the healthy ones or throwing out the diseased parts. You can also fertilize just before or after pruning, which gives Flaming sword a little vitamin boost that can provide it the nutrients needed to better protect itself from any nearby pathogens or diseases. You don’t need much after care when you’re done pruning. It might benefit from light watering and some liquid plant food to encourage new blooms and growth.

Chances are you’re not getting the Flaming sword from seed, which means you’re already getting a mature plant. Since the plant doesn’t have a true dormancy cycle, there are really only two phases: blooming and non-blooming. While the plant is blooming, you should only remove yellow or dead leaves and cut off any brown tips on the leaves. Avoid doing too much pruning during this time as it can stress the plant. Still, you should remove any diseased or dead leaves to keep your plant presentable. The best time to prune is after the blossoms have already wilted. You can remove both the spent blossoms and any old and yellowed leaves at the same time. If you’re noticing a large amount of yellow leaves, you might be overwatering your plant or not giving it enough nutrients. While yellow or brown leaves don’t always mean there’s an issue, if you notice a large amount of leaves shifting colors, it usually means there’s a problem with the plant.

As an evergreen plant, Flaming sword doesn’t have the same cycles as those found in colder areas. The leaves will remain green throughout the year, which is one of the many reasons it is a popular houseplant. If you want to deadhead, you should do so after the blossoms have already wilted. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

How you prune the Flaming sword will depend on whether you’re performing general care or deadheading. For general care, simply cut off the blossoms that have already died. Make sure to get as close to the base as possible and snip at a 45-degree angle. Repeat this for all stalks with wilting blooms. After that, trim back any outer leaves that are old and yellowing. If you simply want to thin the plant out, start with the outermost leaf and work your way in. Avoid removing more than 30 percent of the leaves at once. Throughout the growing phase, make sure to pay close attention to any potential diseased leaves and remove these as necessary.

As jungle plants, Epiphytic Bromeliads grow in a variety of locations in the rainforest. Some of them are found closer to the forest floor, receiving only dappled sunlight that finds its way through tall canopies. Others grow as epiphytes higher up on the trees and are exposed to direct sunlight. That is why it is essential to know what type of plant you’re getting. As a general rule, epiphytic bromeliads naturally exposed to more sun have thicker, stiffer leaves, while species naturally growing in the shade have more tender, thinner leaves. However, as stressed before, always check the individual species’ needs. The safest bet for Flaming sword is to be exposed to bright but mostly indirect light - e.g., from an east-facing window. Also, it is safe to assume that Flaming sword will get sunburned if exposed to direct sunlight during prolonged periods, so avoid this with all family members.

The consequences of inadequate lighting for Flaming sword can go in two directions. If Flaming sword receives too much direct sunlight and belongs to species adapted to shady conditions, the leaves may start looking bleached-out and paler than usual at first. Eventually, leaf scorching is almost certain to occur. On the other hand, if Flaming sword receives too little sunlight, the foliage will lose its color and turn darker. That is especially true for variegated plants that may lose all their additional colors and turn solid green. Also, as a general consequence, Flaming sword that fails to receive enough sunlight according to their species’ needs will grow poorly.

Tropical conditions of Flaming sword’s original homes are quite stable throughout the plant’s lifetime, and the light doesn’t have to vary between seasons. However, increasing the light exposure can trigger the plant to bloom - a highly desired event. Still, it’s not just about the light levels - all other conditions, such as temperature and humidity, should be met for this to happen.

If you have just bought your Flaming sword from a non-specialized store, they have likely been exposed to low light conditions for some time. Even if the particular species belongs to the sun-loving Flaming sword subtype, you need to gradually introduce it to brighter, natural sunlight conditions. That practice is called hardening. Start by exposing your plant to indirect window light, pulling it closer to the light source each day. After several days, the plant can receive its first direct morning light, but only for a very short time.

The absolutely ideal conditions for Flaming sword - both temperature and light-wise - is a greenhouse setup with temperatures averaging between 70 and 80 °F (21 and 27 °C), with bright indirect light, good air circulation, and high humidity. However, the popular Flaming sword species are not overly sensitive and are easily grown in average home conditions. As a simple rule - if you feel pleasant in your room temperatures, these are likely adequate for your Flaming sword as well.

East or west-facing window light is ideal for most Flaming sword. However, if the west-facing window is in question, the direct afternoon light may be too harsh for some species, so ensure greater distance from the window or another type of shading during the critical part of the day. If a south-facing window is your only option, keeping Flaming sword next to it can be possible if you create some distance between the light source and the plant, plus filter the light through a suitable curtain. Again, the ideal position will largely depend on the species in question, and you need to factor in other requirements, such as humidity, into the equation. For example, bathrooms are ideal for Flaming sword regarding humidity but may not secure enough light for many species unless you have a window in there. However, some species may thrive under low-light bathroom conditions with some natural light available and some supplemented by artificial fluorescent light. Other positions, such as kitchen windows, may provide ideal light but may be too dry. In that case, try increasing the humidity around the plant by creating a humidity tray under the pot or adding a humidifier. Also, Flaming sword will thrive outdoors in tropical climates and can be brought out during the summer in warm temperate climates. In outdoor conditions, they perform well under trees with broad and semi-thick canopies that create dappled light conditions. Also, shaded patios and bright porches are also great options.

Flaming sword tends to prefer the same general temperature ranges. While they can tolerate temperatures as low as 50℉(15℃), this plant likes higher temperatures that more closely resemble those of tropical and subtropical regions. Being an epiphytic plant, meaning that most of the water of Flaming sword comes from air humidity and not groundwater, higher temperatures are better. The humidity that Flaming sword prefers is best obtained with temperatures over 75℉(25℃). Since humidity is created when water is vaporized into warm air, maintaining humidity is easiest with warmer temperatures. Before you blast your air conditioner in the warm months, make sure these plants are out of the way of the coolest drafts! Anywhere from 75~90℉(25~32℃) is perfect, but cooler temperatures down to 50℉(15℃) are acceptable.

Flaming sword doesn’t need a period of dormancy, or a cold period, to effectively bloom and reproduce. This means that ideal temperatures should be maintained year-round. However, if your Flaming sword does experience temperatures cooler than 50℉(15℃) or hotter than 95℉(35℃) , it may cause some damage. The extent of the damage is specific to how long it was exposed to extreme cold or heat, its genotype, and what stage the plant is in. Cold temperatures below 50℉(15℃) will cause frostbite on the leaves of a Flaming sword. This normally appears as black spots or entirely blackened leaves, but this process can take a few days to become apparent. At first, the leaves will look droopy, then slowly become discolored. It’s difficult to save the Flaming sword from this fate, but sometimes they can grow back over the course of several months. If the Flaming sword is exposed to very high temperatures, it will simply wilt. If the leaves become too dry, they may not revive; however, if the exposure wasn’t very long, then the heat spike may have no lasting effect. Flaming sword can tolerate heat much better than cold.

You can easily keep the Flaming sword warm without the use of a heating pad or nearby heater (though if you’re using one anyway, it doesn’t hurt to share!). To maintain optimal temperatures, consider planting Flaming sword in a terrarium. By enclosing the space around the plant, you create a sort of micro-environment with higher humidity and temperature than outside the glass, which in itself holds heat for some time. If you live in a warm region where it may be too dry to place Flaming sword outside, you can always place it near a warm window or an exterior wall that warms up during the day under full sun exposure; just be sure not to provide too much sunlight as a consequence of moving the plant too close to a bright window. Sheer curtains can remedy this issue. On the other hand, if you live in a tropical or subtropical climate where outside temperatures stay between 55-90℉(13-32℃) day to night, you can grow Flaming sword outside year-long. If the temperature drops below this range, simply bring them indoors for the night or cover them with a thin cloth to prevent cold damage.

Sometimes, temperature fluctuations can sneak up in ways you might not expect. One of the most common temperature breaches for Flaming sword is from windows. If you grow your Flaming sword in a window, be aware of how outside temperatures can affect the temperature of the window and how much of that cold or hot air reaches your plant. Another common household temperature breach is air conditioning and heaters. We might not realize it since we don’t hover over these things in our homes, but a direct draft from air conditioners can chill Flaming sword to well below its preferred temperature range. Similarly, heaters can effectively dry out it very quickly, which causes the leaves to harden and eventually wither away.

Fertilizer, and soil nutrients in general, are an essential form of fuel that your Flaming sword will use to maintain healthy growth. In general, plants use the nutrients they find in the soil to develop new plant material and keep their existing components in good condition. For the Flaming sword specifically, fertilization is necessary to help this plant display the best version of its flowers. Since the flowers are the main form of attraction to this plant, most gardeners will want to do all they can to ensure the flowers appear in their best form. Fertilization is one of the most reliable ways to help your Flaming sword produce the best possible blooms.

The Flaming sword goes through two main phases throughout each year. The first phase is the dormant phase, in which this plant will put forth minimal new growth. This dormant phase takes place during the winter. The other phase is the active growth phase, which takes place during spring and fall, which is when your Flaming sword will need fertilization the most. Generally, it is best to fertilize your Flaming sword starting in the spring months. You should repeat the feeding about once per month throughout the rest of the spring and through most of the summer. As fall approaches, you can begin to reduce your fertilization rate.

You want to support Flaming sword growth, but you also don’t want to cause root burn. Your plant is actively growing in the spring and summer, it’s when the extra nutrients are necessary. In the fall and winter, your plant will enter its dormancy stage. It’s when you want to stop fertilizing.

The ideal fertilizer for a Flaming sword is one that has a relatively balanced mix of the three main plant nutrients, with slightly higher amounts of phosphorus. Alternatively, some gardeners choose to improve their Flaming sword 's soil by adding organic materials such as compost, worm castings, and manure. Fertilizers can come in many forms, and most of these forms will work well for your Flaming sword. However, some of the best fertilizers for Flaming sword come in either a liquid or a powdered form. Regardless of which you use, you should ensure that you dilute your fertilizer and apply it while watering your Flaming sword.

Once you have found a suitable fertilizer and learned the ideal fertilization schedule for your Flaming sword, you are ready to learn how to apply your fertilizer. When feeding your Flaming sword, the most reliable method is to mix your liquid fertilizer with water before applying it to the soil. Each fertilizer may have different directions on how to feed your plants. Usually, it is best to follow the manufacturer's guidance on how to use the fertilizer they produce. These instructions should include information on how to properly dilute the fertilizer to prevent overfertilization. Mixing your fertilizer in water is an easy process, and once it is complete, all you need to do is pour the mixture into the soil where your Flaming sword lives.

Overfertilization is something that you should consider when caring for any plant, but it is especially important when growing a Flaming sword. A Flaming sword, when overfertilized, will show clear signs of distress, which, at times, may be so serious that they lead to the death of your plant. Overfertilized Flaming sword will likely show leaf discoloration as well, including browning. In the worst-case scenarios, excessive fertilization will draw moisture out of your plant's roots, which can cause it to decline quickly.